Automoble Engineering will be the foremost conference for all eminent professionals dealing with Automoble Engineering and research science to come together and enrich this event with their research findings and experiences. Automoble Engineering offers over 7 scientific sessions from different research areas in the field of Automoble Engineering research science in the form of keynote presentations, plenary sessions, oral sessions, panel discussions, posters presentations, workshops, symposia, and young researchers’ forum.Automoble Engineering is going to be held on August 22-23, 2022 in Vancouver, Canada. Automoble Engineering will address the succeeding research and development in the field of Future Transportation,Autonomous Vehicles, Solar cars, Robotic Process Automation and this will provide a major opportunity for collaboration and interaction among all research scholars and industry personnel.
Scientific Sessions:
Session 1: Future Transportation:
The Future of transportation involves moving into new, smarter sources of energy, modes of transport and physical and technological infrastructure to support these transportation innovations. Three common themes in transportation innovation are: Smart technology, Electrification & Autonomy.
New transportation innovations:
- Autonomous aerial vehicles
- Hoverbikes
- Self-driving taxis
- The Hyperloop
Automobile Conference | Automobile Expo Conference | Future Transportation Meetings | Robotic Process Symposiums | Automobile Technology Conference | NVH Safety Meeting | Vehicle Design Workshops | Solar cars Conference | Smart technology Summit | Vehicle Design Conference | Safety Considerations Meeting | Self-driving car
Session 2: Autonomous Vehicles:
A self-driving car, also known as an autonomous vehicle (AV or auto), driverless car, or robo-car is a vehicle that is capable of sensing its environment and moving safely with little or no human input.
Self-driving cars combine a variety of sensors to perceive their surroundings, such as radar, lidar, sonar, GPS, odometry and inertial measurement units. Advanced control systems interpret sensory information to identify appropriate navigation paths, as well as obstacles and relevant signage.
Automobile Conference | Automobile Expo Conference | Future Transportation Meetings | Robotic Process Symposiums | Automobile Technology Conference | NVH Safety Meeting | Vehicle Design Workshops | Solar cars Conference | Smart technology Summit | Vehicle Design Conference | Safety Considerations Meeting | Self-driving car
Session 3 : Solar cars:
A solar car is a solar vehicle used for land transport. Solar cars usually run on only power from the sun, although some models will supplement that power using a battery, or use solar panels to recharge batteries or run auxiliary systems for a car that mainly uses battery power.
Solar cars combine technology typically used in the aerospace, bicycle, alternative energy and automotive industries. The design of a solar vehicle is severely limited by the amount of energy input into the car. Most solar cars have been built for the purpose of solar car races. Some prototypes have been designed for public use, and the Lightyear One solar charged battery electric vehicle is expected to be available starting in 2021; currently, no cars primarily powered by the sun are available commercially.
Automobile Conference | Automobile Expo Conference | Future Transportation Meetings | Robotic Process Symposiums | Automobile Technology Conference | NVH Safety Meeting | Vehicle Design Workshops | Solar cars Conference | Smart technology Summit | Vehicle Design Conference | Safety Considerations Meeting | Self-driving car
Session 4: Computer Graphics and Modeling:
In 3D computer graphics , modeling is the process of developing a mathematical representation of any surface of an object in three dimensional via specialized software .Models can be created automatically or manually .The manual modeling process of preparing geometric data for 3D computer graphics is similar to plastic arts such as sculpting
- Computer - generated imagery CGI
- 3D Printing of automotive
- Wire frame model of cars
- Texture Mapping of automobile
- Motion Capture of the automotive
- Crowd Simulation
Automobile Conference | Automobile Expo Conference | Future Transportation Meetings | Robotic Process Symposiums | Automobile Technology Conference | NVH Safety Meeting | Vehicle Design Workshops | Solar cars Conference | Smart technology Summit | Vehicle Design Conference | Safety Considerations Meeting | Self-driving car
Session 5: Noise, Vibration and Harshness (NVH):
Noise, Vibration and Harshness (NVH), also known as noise and vibration (N&V), is the study and modification of the noise and vibration characteristics of vehicles, particularly cars and trucks. While noise and vibration can be readily measured, harshness is a subjective quality, and is measured either via "jury" evaluations, or with analytical tools that can provide results reflecting human subjective impressions. These latter tools belong to the field known as "psychoacoustics".
Automobile Conference | Automobile Expo Conference | Future Transportation Meetings | Robotic Process Symposiums | Automobile Technology Conference | NVH Safety Meeting | Vehicle Design Workshops | Solar cars Conference | Smart technology Summit | Vehicle Design Conference | Safety Considerations Meeting | Self-driving car
Session 6: Robotic Process Automation:
The advent of Robotic Method Automation (RPA) was a key milestone for the event automotive trade. Automation refers to the use of machines to perform tasks that had previously been undertaken by humans, which reduces the error rate and enhances the management of repeatable tasks. Most prevalent applications are curve welding, plasma cutting, laser cutting, BIW welding lines, palatalizing, tending robots on press machines, CNC machines and so on.
Automobile Conference | Automobile Expo Conference | Future Transportation Meetings | Robotic Process Symposiums | Automobile Technology Conference | NVH Safety Meeting | Vehicle Design Workshops | Solar cars Conference | Smart technology Summit | Vehicle Design Conference | Safety Considerations Meeting | Self-driving car
Session 7: Safety Considerations:
This section discusses some potential safety considerations for electric vehicles. As noted, it was not the intention to imply that electric vehicles are unsafe or would expose the public to greater risks than conventional vehicles.
- Electrical safety in use
- Electrical safety post-crash
- Crash compatibility of electric vehicles
- Rechargeable energy storage systems
Automobile Conference | Automobile Expo Conference | Future Transportation Meetings | Robotic Process Symposiums | Automobile Technology Conference | NVH Safety Meeting | Vehicle Design Workshops | Solar cars Conference | Smart technology Summit | Vehicle Design Conference | Safety Considerations Meeting | Self-driving car
Market Analysis
The global automotive engineering services market is projected to grow at a CAGR of 8.8% from USD 153.3 billion in 2021 to USD 253.9 billion by 2027. Factors such as the advent of autonomous vehicles, the introduction of 5G network in the automotive industry, OEM and government focus on electric vehicles, use of advanced technology, concerns of vehicle and passenger safety, and vehicle lightweighting are driving the automotive engineering services market.Although the overall production and sales of new vehicles came to a halt across the globe due to the outbreak of COVID-19, the impact on electric vehicles was positive. The number of EVs sold in 2020 was more than the total EVs sold in 2019. According to EV-Volumes, the global EV market (passenger cars and commercial vehicles) share increased from 2.5% in 2019 to 4.2% in 2020. Almost 1.4 million plug-in EVs were sold in Europe in 2020, 137% more than in 2019. Key factors for the market growth in Europe include new models, incentive boosts by green recovery funds, the 95g CO2 emission mandate, and the intense promotion of plug-in EVs. In China, NEV sales recovered in the second half of 2020, with a growth rate of more than 80% year-on-year from July to December. EV sales in the US increased by 4%, despite the Tesla Model-Y launch. A decline in EVs sales was witnessed in countries like Japan, Canada, and Australia
Past Conferences Report
Robo Talks 2020
We gratefully thank all our wonderful speakers and delegates for making Artificial Intelligence 2020 webinar successfull.
Webinar on Artificial Intelligence and Robotics, hosted by the Longdom Conference was held on August 23, 2020 virtually based on the theme “Advancements and Innovations in Artificial Intelligence and Robotics"
The conference was initiated with the honourable presence of the below speakers. The list includes:
- Andrew Ernst Rits, Lang Tech, Poland.
- Gerry Wolff, CognitionResearch.Org, UK.
- Kelvin Obga, Obga Educational Clinic, Nigeria.
- Adam Alonzi, Princeton University, USA.
- Elisha Marandure, Ebenezer Group of Colleges, Zimbabwe.
- Neda Nividi, AI-R Inc., Canada
Artificial Intelligence 2020
We gratefully thank all our wonderful speakers and delegates for making Artificial Intelligence 2020 webinar successfull.
1st International Conference on Automation and Artificial Intelligence, hosted by the Longdom Conference was held on May 21, 2020 virtually based on the theme “Advancements and Innovations in Automation and Artificial Intelligence."
The conference was initiated with the honourable presence of the below speakers. The list includes:
- Steven Lockey, University of Queensland Business School, Australia
- Tomasz Bak, Digital Fingerprints, Poland
- Ouardi Amine, Hassan II University, Morocco
- Md Rahatul Islam, Advance Robotics Research Center, Bangladesh
- Kanimozhi V, Sathyabama Institute of Science and Technology, India
3D Technology 2021
We gratefully thank all our wonderful speakers and delegates for making 3D Technology 2021 webinar successfull.
Webinar on 3D Technology, hosted by the Longdom Conference was held during June 24, 2021 virtually based on the theme “Exploring Advances in 3D Technology "
The conference was initiated with the honourable presence of the below speakers. The list includes:
- Jens Bliedtner, Ernst Abbe University of Applied Sciences,Germany
- Yachna Sharma, Georgia Tech Scheller School of Business, USA
- Alan Kalpan, Novartis Pharma AG, Canada
- Mohd Nadhir Ab Wahab, Universiti Sains Malaysia, Malaysia
- M.Vikas, Indian Institute of Technology (IIT), India.
Vehicle Design 2021
We gratefully thank all our wonderful speakers and delegates for making Automobile Expo 2021 webinar successfull.
International Webinar on Vehicle design 2021, hosted by the Longdom Conference was held during June 23, 2021 virtually based on the theme “Exploring Advances in Automobile Engineering"
The conference was initiated with the honourable presence of the below speakers. The list includes:
- Praveen Malik, Lovely Professional University, India
- Mahsa Rahimbeigi , Iran University of science and technology, Iran
- Abolfazl Khalkhali, The University of Guilan, Iran
- Asith Abeysinghe, RMIT University, Australia
- Manikandan H, BIITS Pilani, India
Robotalks 2021
We gratefully thank all our wonderful speakers and delegates for making Artificial Intelligence 2021 webinar successfull.
International Webinar on Artificial Intelligence, hosted by the Longdom Conference was held during April 29, 2021 virtually based on the theme “AI Goes above and beyond Our Human Intelligence "
The conference was initiated with the honourable presence of the below speakers. The list includes:
- Sabrina Tiun, Universiti Kebangsaan Malaysia (UKM), Malaysia
- Peishun Liu, University of China, China
- Alan Kalpan, Novartis Pharma AG, Canada
- Rishabh Jain, University of Hertfordshire, UK
- Rishabh Chopra, Narsee Monjee Institute of Management, India
Artificial Intelligence 2021
We gratefully thank all our wonderful speakers and delegates for making Artificial Intelligence 2020 webinar successfull.
2nd International Conference on Automation and Artificial Intelligence, hosted by the Longdom Conference was held on June 15, 2021 virtually based on the theme “Advancements and Innovations in Automation and Artificial Intelligence."
The conference was initiated with the honourable presence of the below speakers. The list includes:
- Farah Jemili, University of Sousse Tunisia, Tunisia
- Alain De Maertelaere, ADM Consulting, Belgium
- Amel Mhamdi, France Televisions, France
- Leandro Romualdo da Silva, IBM, Brazil
- José Eduardo García-Mendiola, National Autonomous University of Mexico, Mexico
With the grand success of the above events in 2020 and 2021, Longdom Conferences is proud to announce the upcoming " International Conference on Future of Automobile Engineering" to be held on August 22-23, 2022 in Vancouver, Canada.
For More details visit: www.longdom.com/automobile